Nowadays, when the use of natural gas is relatively widespread, due to recent events measures against carbon monoxide leaks have become inevitable.


As carbon monoxide is a gas, which is colorless, odorless, tasteless and invisible, it is nearly impossible to understand its presence in the locality.


The only method of detecting natural gas within the locality is to use a carbon monoxide gas detector which chemically detects the presence of this gas.


Thanks to the carbon monoxide gas detector, which you can add to your system, in case of a gas leak, both the external siren will go off and also the alarm information will reach the TEPE Alarm Monitoring Center.



PRODUCTS USED IN THE SYSTEM
  Alarm Panel
It is the primary product where all the products of the alarm system are connected to, data is collected and point where commands are given.  The alarm panel conveys all the signals it receives from the components fitted to the alarm system and all the faults (low battery, power outage, phone line problems etc.) occurring on the system to the Alarm Monitoring Center.
 
  Keypad
It is the product where all operations regarding the alarm system are carried out. (Activation of the alarm, closing the alarm, programming, coding etc.) LCD and LED models are also available.
 
  Motion Detector
The detectors sense any activity in the protected area and convey the alarm data to the panel. Currently there are microwave, and dual etc. detectors which do not detect animals on the market. Dual detectors, which eliminate the risk of false alarms (Infrared + micro wave), have started to be the preference of users.
 
  Magnetic Contact
It is a product which is fitted onto moving objects such as doors, slide doors and windows. In case the fitted point is opened without permission, the alarm system activates.
 
  Remote Control
It is a product used in wireless systems, which you can use to perform operations that are performed on the panel such as activating or closing the alarm system, panic alarm, setting procedures at home or outside.
 
  Panic Button
In emergencies, alarm is activated by manually pressing it. The panic alarm does not set the sirens off but a signal is sent to the Alarm Monitoring Center.
 
  Gas Detector
It detects the gas leaks in the ambience and sets the alarm system off. (un-combusted gases such as natural gas, LPG) "It works 24 hours a day regardless of whether the system is activated or not."
 
  Smoke Detector
It detects the smoke in the ambience and sets the alarm system off. It works 24 hours a day regardless of whether the system is activated or not.
 
  External Siren
It is fixed outside of the locality in a visible location. It increases the deterrence with the flashing LED lights outside of it. In case of an alarm, it makes a large sound and warns the environs. In case its cable is cut or cover is unfitted, it perceives this to be sabotage and the guarded battery inside activates and causes the siren to go off.
 
  Internal Siren
It is used inside of the locality in order to support the external siren. In case of burglary, the warning of both the internal and external alarm causes the burglar to panic and flee.
 
  GSM GPRS Communicator Module

In case your phone line has been cut, the alarm data is sent to the Alarm Monitoring Center through the GSM module. Thus, the system can constantly send data without interruption.